GRSE Well Water Pumps

DEEP WELL WATER PUMPS

VERTICAL TURBINE PUMPS

GRSE pumps are highly efficient in tapping underground water sources. They are highly dependable having low operating costs and are suitable for use in deep tubewell, bore-hole or open wells for both agriculture and industrial sectors.

Vertical Turbine Pumps

Vertical Turbine Pump

SIZES AND CAPACITIES

Pump Design No.	Pump Size in mm.	Bowl. dia (outside) in mm.	Minimum dia. of tubewell in mm.	Recomm- ended dia. of Tubewell in mm.	Capacity Range		Speed RPM	Water/ Oil Lubricated Pump
Pump Design No.	Pump Size in mm.	Bowl. dia (outside) in mm.	Minimum dia. of tubewell in mm.	Recomm- ended dia. of Tubewell in mm.	Litres per minute	Gallons per minute	Speed RPM
2204	100	95	100	150	45 to 230	10 to 50	2900
2206	150	140	150	200	180 to 340	40 to 89	1460
2206	150	140	150	200	370 to 680	80 to 169	2900
3206	150	140	150	200	225 to 460	50 to 199	1460
3206	150	140	150	200	460 to 910	100 to 200	2900
4206	150	140	150	200	225 to 550	50 to 120	1460
4206	150	140	150	200	460 to 1090	100 to 240	2900
5106	150	140	150	200	370 to 730	80 to 160	1460
5106	150	140	150	200	730 to 1460	160 to 320	2900
2207	175	165	175	200	322 to 640	70 to 140	1460
2207	175	165	175	200	650 to 1280	140 to 280	2900
3207	175	165	175	200	320 to 730	70 to 160	1460
3207	175	165	175	200	640 to 1480	140 to 320	2900
2208	200	190	200	250	640 to 1280	140 to 280	1460
2208	200	190	200	250	1280 to 2550	280 to 560	2900
3208	200	190	200	250	730 to 1460	150 to 320	1460
3208	200	190	200	250	1460 to 2900	320 to 640	2900
5208	200	190	200	250	910 to 2500	200 to 550	1460
5208	200	190	200	250	1820 to 5000	400 to 1100	2900
1110	250	238	250	300	800 to 1870	180 to 410	1460
2110	250	238	250	300	1280 to 2550	280 to 560	1460
3110	250	238	250	300	1370 to 2960	300 to 650	1460
4110	250	238	250	300	3050 to 3870	450 to 850	1460
5110	250	238	250	300	2730 to 4550	600 to 1000	1460
2112	300	288	300	350	1820 to 4090	400 to 900	1460
3112	300	288	300	350	2730 to 5460	600 to 1200	1460
4112	300	288	300	350	3180 to 6370	700 to 1400	1460
5112	300	288	300	350	4550 to 7280	1000 to 1600	1460
3114	350	338	350	400	3350 to 8050	745 to 1290	1460
4116	400	384	550	600	6370 to 13650	1400 to 3000	1460
5116	400	384	550	600	7280 to 16380	1600 to 3600	1460
4118	450	440	600	650	9100 to 19500	2000 to 4300	1460
5118	450	440	600	650	10200 to 20400	2250 to 4500	1460
3120	500	490	650	700	16660 to 21660	3665 to 4765	1460

Note :-

Pumps of design No. 2204 are available in water lubricated type only.
Pumps of other designs are available both in water lubricated and forced water/oil lubricated types.

SUBMERSIBLE PUMPS

Submerged Motor Driven Pumps are ideal solution for supply of water for agricultural, civil and industrial uses at low cost.

OVERALL DIMENSION OF SUBMERGED SEMI-AXIAL PUMPS FOR
150 mm. 200 mm. and 250 mm. WELLS

Pump Type	Limiting Nos. of Stages	O.D. of Pump Assy	O.D. of Motor	Discharge Outlet
(A)	(B)	(C)	(D)	(E)
2206	7	140	136	100
3206	4	140	136	100
4206	4	140	136	100
5106	3	140	136	100
2207	3	165	136	100
3207	2	165	136	100
2208	3	190	185	100/150
3208	2	190	185	100/150
**5208	1	190	185	100/150
1110	1	240	185	150/200
2110	3	240	245	150/200
3110	2	240	245	150/200
4110	2	240	245	150/200
5110	2	240	245	150/200

Diameter of Motor

@H.P.	Diameter
5, 7.5	136 mm.
10	136 mm.
12.5 , 15	185 mm.
17.5 , 20
25 , 30

Submersible Pump

Submersible Pump

Note :-

@ - Limiting Nos. of stages - Maximum numbers of stages of any particular type of pump which can be run by the motor having frame O.D. 'D' above.

** - Boundary Cases - Can match with the motor for a part of the working range only.

LENGTH & WEIGHT OF THE COMPLETE COUPLED UNIT WILL BE DETERMINED BY NOS. OF STAGES, MOTOR HP AND FRAME SIZE OF THE MOTOR.